![]() ![]() If the speed is not displayed, check that conditions Rotate the crank in the non driving direction and check cadence is displayed. In the case of the cadence sensor, press MODE to display C (cadence) on the mode screen. In the case of the speed sensor, lift the rear wheel off the ground and spin the wheel to check the speed is displayed. * After installation, check that the speed sensor and cadence sensor are functioning properly. The clearance between the sensor surface and the magnet must not exceed 3 mm.ģ Speed sensor 4 Cadence sensor 5 Wheel magnet 6 Cadence magnet 7 The magnet should pass through the sensor line. * When installing cadence sensor 4, insert Install the speed sensor and wheel magnet LCD screen may be distorted when viewed through polarized sunglass lenses.Dispose of used batteries according to local regulations.When cleaning the computer, bracket and sensor, do not use thinners, benzene, or alcohol.Tighten the dial on the Flex-Tight bracket by hand only.If you do, the contact points will conduct Never place the computer on a metal surface.Pressing hard on other areas can result in malfunction or damage to the computer. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |